Retroid Handhelds - User contributions [en]

Emulators

2021-01-02T02:43:03Z

173.61.114.27: /* Emulation within RetroidOS */

__TOC__

== Emulation within RetroidOS ==

RetroidOS supports the following systems, with the listed emulator cores:
{| class="wikitable"
|-
! System !! Emulator core
|-
| Arcade || Final Burn Alpha (2.97.08, 2.97.42, 42_ORI, 42_HOME)
MAME (0.37, 0.78, 0.106, 0.139, 139_RA)
|-
| NES/Famicom || FCEmu
|-
| Master System || Genesis Plus
|-
| Gameboy/Gameboy Color || TGB Dual
|-
| PC Engine || Beetle PCE
|-
| Wonderswan/Wonderswan Color || Beetle Cygne
|-
| Mega Drive/Genesis/CD/32X || Genesis Plus
|-
| SNES/Super Famicom || SNES9X
|-
| Gameboy Advance || gPSP
|-
| PlayStation 1 || PCSX (labelled as PSCX)
|-
| Nintendo 64 || Mupen64 Plus
|-
| PlayStation Portable || PPSSPP
|-
| Dreamcast || Reicast
|}

There are no changeable settings for emulators within RetroidOS, and currently there is no way to add new emulation cores.

== Emulation within Android ==

This section contains free [https://www.retroarch.com/ RetroArch] and stand alone emulator options. The one paid app that many recommended is DraStic for Nintendo DS emulation.

It is generally not recommended to update the pre-installed emulators, as the Retroid developers seem to have chosen these builds because they run well on the device.

===RetroArch Cores===

The Retroid Pocket 2 comes pre-installed with two versions of RetroArch (1.8.4 & 1.5.0) and the listed emulator cores.

RetroArch 1.5.0

*Game Boy Advance (gpSP) This is installed separately because RA 1.5.0 has the best performance for gpSP/GBA

RetroArch 1.8.4

*Arcade (FB Alpha 2012 CPS-1)
*Arcade (FB Alpha 2012 CPS-2)
*Arcade (FB Alpha 2012 Neo Geo)
*Arcade (MAME 2000)
*Arcade (MAME 2003)
*Arcade (MAME 2010)
*Arcade (MAME 2015)
*Atari - 2600 (Stella)
*Atari - 5200 (Atari800)
*Atari - Lynx (Handy)
*Bandai - WonderSwan/Color (Beetle Cygne)
*Commodore - Amiga (P-UAE)
*Commodore - C64 (VICE x64, fast)
*DOS (DOSBox - SVN)
*GCE - Vectrex (vecx)
*Microsoft - MSX (fMSX)
*Minecraft - (Craft)
*MSX/SVI/ColecoVision/SG-1000 (blueMSX)
*NEC - PC Engine / CD (Beetle PCE FAST)
*Nintendo - Gameboy / Color (Gambette)
*Nintendo - NES / Famicom (FCEUmm)
*Nintendo - SNES / SFC (Snes9x 2002)
*Quake (TyrQuake)
*Sega - Dreamcast/Naomi (Flycast)
*Sega - MS/GG/MD/CD (Genesis Plus GX)
*Sega - MS/GG/SG-1000 (Gearsystem)
*Sega - MS/MD/CD/32X (PicoDrive)
*SNK - Neo Geo CD (NeoCD)
*SNK - Neo Geo Pocket / Color (RACE)
*Sony - PlayStation (PCSX ReARMed)
*The 3DO Company - 3DO (4DO)
*ZX Spectrum (Fuse)

For help setting up and using Retroarch on the RP2, see [[A Brief Guide to Retroarch]].

==== N64 Core Tips ====

You can use N64 in your RP2 with RetroArch (so you can use RetroAchievements, for instance). Not every game runs perfect, and many need further tweaking, but overall you should be pleasantly surprised.

This only works with Mupen64Next or NextGLES2 (GLES3 and Parallel simply crash).

Paste the contents of [https://cdn.discordapp.com/attachments/757645077429616780/758129936334061589/Mupen64Plus-Next.opt Mupen64Plus-Next.opt] to:

* <internal storage>/Android/data/com.retroarch/files/retroarch-core-option.cfg

Or paste the full OPT file here:

* <internal storage>/retroarch/configs/Mupen64Plus-Next/

Please note:

* Use only glide64 for video (angrylion is slow, parallel simply fails).

* All mupen cores share the same configs.

===Stand Alone Apps===

The RP2 Comes pre-installed with the following stand alone apps:

*Flycast - You will need to configure Reicast and configure the Bios. See [https://wiki.retroidhandhelds.com/index.php?title=Emulators#Dreamcast_Configuration_Tips DC Configuration Tips] at the bottom of this page (Flycast is not included on beta batch units).

*MAME4droid(0.139u1) - You will need a .139 MAME Romset.

*Mupen64Plus FZ - Use recommended rendering profile per game for optimal performance. [https://cdn.discordapp.com/attachments/742403626634575903/756279168098107422/mupen64plus-fz.7z Here] is Mupen's settings & render profiles if you lose them, copy to internal storage.

*N64oid - Right joystick will not map.

*NeoDroid - NeoGeo MVS Emulator - Compatible with MAME Roms. Put neogeo.zip bios file in your roms directory “/sdcard/neodroid/roms”.

*PPSSPP - Use the recommended profile settings per game for optimal performance.

*Reicast - The back end for Flycast (beta units only have Reicast installed).

*ScummVM - Shows no directories on launch. Fix is to search for a game and place a “/“ in the search box and select “Choose”. This will bring up the directory listing.

===Best Performing Emulators===

This table of stand alone apps & RetroArch cores seem to get the best performance out of the device. We have prioritized cores over apps whenever possible, and only if performance is equivalent or better. We have also prioritized free apps over paid apps whenever possible, and again, only if performance is equivalent or better.

{| class="wikitable" style="text-align: left;"
|-
! scope="col" style="text-align:left; color:white; background-color:#464646;"| System
! scope="col" style="text-align:left; color:white; background-color:#464646;"| Emulator Options
! scope="col" style="text-align:left; color:white; background-color:#464646;"| Notes
|-
! scope="row" style="text-align:left;" |MAME Arcade
| [https://sourceforge.net/projects/mame4droid/files/MAME4droid%200.139u1-1.15.2-release.apk/download MAME4droid 0.139u1]
| App. Pre-installed. Needs the .139 MAME Romset.
|-
! scope="row" style="text-align:left;"| DOS
| [https://docs.libretro.com/library/dosbox/ DOSBox]
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| Atari 2600
| [https://docs.libretro.com/library/stella/ Stella]
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| FC/NES
| FCEUmm
| Core. Pre-installed. Has netplay for multiplayer.
|-
! scope="row" style="text-align:left;"| Sega Master System
| Genesis Plus GX
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| Atari Lynx
| Handy
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| MegaDrive/Sega Genesis
| Genesis Plus GX
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| PCE/TurboGrafx 16
| Beetle PCE FAST
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| PCE-CD/TurboGrafx CD
| Beetle PCE FAST
| Core. BIOS Files Needed
|-
! scope="row" style="text-align:left;"| NeoGeo
| NeoDroid
| App. Pre-installed.
|-
! scope="row" style="text-align:left;"| Sega Game Gear
| Genesis Plus GX
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| SFC/SNES
| Snes9x 2002
| Core. Pre-installed. Has netplay for multiplayer.
|-
! scope="row" style="text-align:left;"| Sega CD
| Genesis Plus GX
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| Panasonic 3DO
| Opera/4DO
| Core. BIOS Files Needed
|-
! scope="row" style="text-align:left;"| Nintendo Virtual Boy
| Beetle VB
| Core.
|-
! scope="row" style="text-align:left;"| Sony PlayStation
| PCSX-R
|[https://docs.libretro.com/library/pcsx_rearmed/ Core.] Pre-installed.
|-
! scope="row" style="text-align:left;"| Nintendo 64
| Mupen64Plus FZ
| App. Pre-installed. *The most recent PlayStore version will not work. [https://www.apkmirror.com/apk/francisco-zurita/mupen64plus-fz-n64-emulator/mupen64plus-fz-n64-emulator-3-0-222-beta-release/mupen64plus-fz-n64-emulator-3-0-222-beta-android-apk-download/download/?forcebaseapk This] is the latest working version.
|-
! scope="row" style="text-align:left;"| Nintendo Game Boy Color
| Gambette / My Old Boy!
| Core. Pre-installed. Paid App. / My Old Boy! has Link cable emulation for local and remote multiplayer.
|-
! scope="row" style="text-align:left;"| NeoGeo Pocket Color
| RACE
| Core. Pre-installed.
|-
! scope="row" style="text-align:left;"| Sega Dreamcast
| Flycast
| App. Pre-installed (not in beta batch units). Core. Pre-installed. See [https://wiki.retroidhandhelds.com/index.php?title=Emulators#Dreamcast_Configuration_Tips DC Config Tips] below. [https://docs.libretro.com/library/flycast/ Docs]. RA [https://buildbot.libretro.com/stable/1.9.0/android/RetroArch.apk 1.9.0] has been tested to achieve better Flycast performance than RA 1.8.4.
|-
! scope="row" style="text-align:left;"| Nintendo Game Boy Advance
| gpSP / MyBoy!
| Core. Pre-installed in RA 1.5.0 only. Other GBA cores in other RA versions do not run as well. / Paid App. MyBoy! has Link cable emulation for local and remote multiplayer.
|-
! scope="row" style="text-align:left;"| Nintendo DS
| DraStic
| Paid App. To set controller mappings, go to Settings -> External Controller and choose Select Key Mapping, then choose PlayStation 3. Use home button to enter mouse mode when needed. You can set right stick as stylus.
|-
! scope="row" style="text-align:left;"| Sony PSP
| PPSSPP
| App. Pre-installed. Struggles with more demanding 3D games such as God of War.
|-
! scope="row" style="text-align:left;"| SCUMMVM
| SCUMMVM
| App. Pre-installed. Has a known bug that shows no directories on launch. Fix is to search for a game and place a “/“ in the search box and select “Choose”. This will bring up the directory listing
|-
! scope="row" style="text-align:left;"| Atari 5200
| Atari 800
| Core. Core Settings must be switched to "Atari 5200", resolution set to 336x240
|-
! scope="row" style="text-align:left;"| Commodore 64
| C64.emu / RetroArch Vice C64
| App / Core. In Retroarch reduce SID Engine to FastSID for smoother experience
|-
! scope="row" style="text-align:left;"| Commodore Amiga
| PUAE
| Core. Needs Bios and a working Amiga Hard Disk File (HDF)
|-
! scope="row" style="text-align:left;"| Pokemon Mini
| Pokemini
| Core
|-
! scope="row" style="text-align:left;"| Sharp X68000
| PX68K
| Core. Needs Bios
|-
! scope="row" style="text-align:left;"| Sinclair ZX Spectrum
| fuse
| Core. Runs great but needs keyboard to control!
|-
! scope="row" style="text-align:left;"| SFC Satellaview
| Snes9x 2005 Plus
| Core. A few glitches
|}

=== All Emulation Options within Android ===

Click the title of a column to sort the table by the contents of that column.

The performance ratings are:
* A: Plays almost all of the system's games at full speed (or better, for example increased resolution) with few to no glitches.
* B: Plays many of the system's games at full speed, or with minor glitches.
* C: Plays some of the system's games at full speed, or with some glitches.
* D: Technically plays some of the system's games, but often not at full speed, or with major glitches.
* E: Does not run any of the system's games in a playable state.

The cost ratings are:
* Free: Completely free.
* Donation: Completely free, but a voluntary donation is requested.
* Trial: A free version is available, but limited in some way, to encourage users to buy a full/pro version.
* Paid: No free or trial version; only available as a paid app.

{| class="wikitable sortable"
|-
! System !! Emulator !! Pre-installed? !! Performance !! Stand-alone? !! Cost !! Notes
|-
| 3DO Company, The - 3DO || 4DO || Yes || D || Retroarch || Free ||
|-
| Arcade (Capcom CPS-1) || Final Burn Alpha 2012 CPS-1 || Yes || ? || Retroarch || Free ||
|-
| Arcade (Capcom CPS-2) || Final Burn Alpha 2012 CPS-2 || Yes || ? || Retroarch || Free ||
|-
| Arcade (MAME 0.37) || MAME 2000 || Yes || ? || Retroarch || Free || MAME 2000 is equivalent to MAME 0.37.
|-
| Arcade (MAME 0.78) || MAME 2003 || Yes || ? || Retroarch || Free || MAME 2003 is equivalent to MAME 0.78.
|-
| Arcade (MAME 0.139) || MAME 2010 || Yes || ? || Retroarch || Free || MAME 2010 is equivalent to MAME 0.139.
|-
| Arcade (MAME 0.139) || MAME4droid(0.139u1) || Yes || ? || Stand-alone || Free || Requires MAME 0.139 compatible ROMs.
|-
| Arcade (MAME 0.159) || MAME 2015 || Yes || ? || Retroarch || Free || MAME 2015 is equivalent to MAME 0.159.
|-
| Arcade (Neo Geo AES) || Final Burn Alpha 2012 Neo Geo || Yes || ? || Retroarch || Free ||
|-
| Arcade (Sega Naomi) || Flycast || Yes || ? || Retroarch || Free ||
|-
| Atari - 2600 || Stella || Yes || ? || Retroarch || Free ||
|-
| Atari - 5200 || Atari800 || Yes || ? || Retroarch || Free ||
|-
| Atari - Lynx || Handy || Yes || ? || Retroarch || Free ||
|-
| Bandai - WonderSwan / Color || Beetle Cygne || Yes || ? || Retroarch || Free ||
|-
| Coleco - ColecoVision || blueMSX || Yes || ? || Retroarch || Free ||
|-
| Commodore - Amiga || P-UAE || Yes || ? || Retroarch || Free ||
|-
| Commodore - Amiga || UAE4ARM || No || ? || Stand-alone || Free ||
|-
| Commodore - C64 || AnVICE x64 || No || B || Stand-alone || Free || Based on VICE v3.0. "Official" Android port of VICE, but no longer supported. Interface is designed around touchscreen and external keyboard, making it difficult to use on the RP2. The RP2 will run the "armeabi-v7a" binary.
|-
| Commodore - C64 || C64.emu || No || ? || Stand-alone || Paid || Based on VICE v3.1.
|-
| Commodore - C64 || VICE x64, fast || Yes || A || Retroarch || Free || Based on VICE v3.3. Switch sound emulation to "Fast SID" at 44.1kHz to get full-speed emulation. Some disk games may not load with True Drive Emulation activated.
|-
| GCE - Vectrex || vecx || Yes || ? || Retroarch || Free ||
|-
| Microsoft - MS-DOS || DOSBox - SVN || Yes || ? || Retroarch || Free || It is possible to install Windows 3.1 on the emulated machine. It may also be possible to install Windows 95.
|-
| Microsoft - MS-DOS || Magic DOSBox || No || ? || Stand-alone || Trial || It is possible to install Windows 3.1 on the emulated machine. It may also be possible to install Windows 95.
|-
| Microsoft - MSX || fMSX || Yes || ? || Retroarch || Free ||
|-
| Minecraft || Craft || Yes || ? || Retroarch || Free ||
|-
| Microsoft - MSX || blueMSX || Yes || ? || Retroarch || Free ||
|-
| Morrowind (The Elder Scrolls) || OMW (aka "OpenMicroWave") || No || ? || Stand-alone || Free || Requires the files from a PC installation of the original game.
|-
| NEC - PC Engine / CD || Beetle PCE FAST || Yes || ? || Retroarch || Free ||
|-
| Nintendo - 3DS || Citra || No || E || Stand-alone || Trial || The RP2 is not powerful enough to run Citra.
|-
| Nintendo - DS || DraStic || No || A || Stand-alone || Paid || Remember to map the stylus to the right joystick, as there are no touchscreen controls. There are patches to fix this for some games. See [https://wiki.retroidhandhelds.com/index.php?title=Nintendo_DS here] for a list of confirmed playable games, including known patches.
|-
| Nintendo - Gameboy / Color || Gambatte || Yes || ? || Retroarch || Free ||
|-
| Nintendo - Gameboy Advance || gpSP || Yes || A || Retroarch || Free || Runs under the older Retroarch app (v 1.5.0, with a GBA icon). Newer GBA cores running in newer versions of Retroarch do not perform well.
|-
| Nintendo - Gamecube || Dolphin || No || E || Retroarch || Free || The RP2 is not powerful enough to run Dolphin.
|-
| Nintendo - Nintendo 64 || Mupen64Plus FZ || Yes || B || Stand-alone || Donation || Use recommended rendering profile per game for optimal performance. [https://cdn.discordapp.com/attachments/742403626634575903/756279168098107422/mupen64plus-fz.7z Here] is Mupen's settings & render profiles if you lose them, copy to internal storage. The most recent version in the Play Store version will not work on the RP2. [https://www.apkmirror.com/apk/francisco-zurita/mupen64plus-fz-n64-emulator/mupen64plus-fz-n64-emulator-3-0-222-beta-release/mupen64plus-fz-n64-emulator-3-0-222-beta-android-apk-download/download/?forcebaseapk This] is the latest working version.
|-
| Nintendo - Nintendo 64 || N64oid || Yes || A || Stand-alone || Free || N64oid does not recognize the right joystick at all.
|-
| Nintendo - NES / Famicom || FCEUmm || Yes || ? || Retroarch || Free ||
|-
| Nintendo - SNES / SFC || Snes9x 2002 || Yes || ? || Retroarch || Free ||
|-
| Nintendo - Wii || Dolphin || No || E || Retroarch || Free || The RP2 is not powerful enough to run Dolphin.
|-
| Nintendo - Virtual Boy || VB || Yes || ? || Retroarch || Free ||
|-
| Quake || TyrQuake || Yes || ? || Retroarch || Free ||
|-
| Sega - 32X || PicoDrive || Yes || ? || Retroarch || Free ||
|-
| Sega - Dreamcast || Flycast || Yes || C || Retroarch || Free || Compatibility can be increased by installing the system BIOS ROM.
|-
| Sega - Dreamcast || Flycast || No || C || Stand-alone || Free || You may need to use Reicast to configure Flycast and configure the Bios. See [https://wiki.retroidhandhelds.com/index.php?title=Emulators#Dreamcast_Configuration_Tips DC Configuration Tips] at the bottom of this page.
|-
| Sega - Dreamcast || ReDream || No || E || Stand-alone || Donation || The RP2 is not powerful enough to run ReDream.
|-
| Sega - Dreamcast || Reicast || Yes || C || Stand-alone || Free || Compatibility can be increased by installing the system BIOS ROM.
|-
| Sega - Game Gear || Gearsystem || Yes || ? || Retroarch || Free ||
|-
| Sega - Game Gear || Genesis Plus GX || Yes || ? || Retroarch || Free ||
|-
| Sega - Master System || Gearsystem || Yes || ? || Retroarch || Free ||
|-
| Sega - Master System || Genesis Plus GX || Yes || ? || Retroarch || Free ||
|-
| Sega - Master System || PicoDrive || Yes || ? || Retroarch || Free ||
|-
| Sega - Mega Drive / Genesis (plus CD) || Genesis Plus GX || Yes || ? || Retroarch || Free ||
|-
| Sega - Mega Drive / Genesis (plus CD) || PicoDrive || Yes || ? || Retroarch || Free ||
|-
| Sega - Saturn || Beetle Saturn || No || D || Retroarch || Free || BIOS files are required. Beetle Saturn uses software rendering, which is extremely CPU intensive. The RP2 can only run games through the Beetle Saturn core at approx. 5-10 fps.
|-
| Sega - Saturn || Classic Boy Gold || No || E || Stand-alone || Trial || Based on the Yabause core. Hangs for a few moments then returns to Classic Boy Gold menu.
|-
| Sega - Saturn || Yaba Sanshiro || No || E || Stand-alone || Donation || The RP2 is not powerful enough to run Yaba Sanshiro.
|-
| Sega - Saturn || YabaSanshiro || No || E || Retroarch || Free || The RP2 is not powerful enough to run the YabaSanshiro core.
|-
| Sega - Saturn || Yabause || No || E || Retroarch || Free || Attempting to load a game with the Yabause core crashes Retroarch.
|-
| Sega - SG-1000 || blueMSX || Yes || ? || Retroarch || Free ||
|-
| Sega - SG-1000 || Gearsystem || Yes || ? || Retroarch || Free ||
|-
| Sinclair - ZX Spectrum || Fuse || Yes || ? || Retroarch || Free ||
|-
| SNK - Neo Geo AES || Neodroid || Yes || ? || Stand-alone || Free || Compatible with MAME Roms. Put neogeo.zip bios file in your roms directory “/sdcard/neodroid/roms”.
|-
| SNK - Neo Geo CD || NeoCD || Yes || ? || Retroarch || Free ||
|-
| SNK - Neo Geo Pocket / Color || RACE || Yes || ? || Retroarch || Free ||
|-
| Sony - PlayStation 1 || PCSX ReARMed || Yes || A || Retroarch || Free || Compatibility can be increased by installing the system BIOS ROM.
|-
| Sony - PlayStation 1 || ePSXe || No || A || Stand-alone || Trial || Compatibility can be increased by installing the system BIOS ROM.
|-
| Sony - PlayStation 1 || FPse64 || No || A || Stand-alone || ? || Compatibility can be increased by installing the system BIOS ROM.
|-
| Sony - PlayStation 2 || Damon PS2 || No || E || Stand-alone || ? || The RP2 is not powerful enough to run Damon PS2.
|-
| Sony - PlayStation 2 || Play! || No || E || Stand-alone || Free || The RP2 is not powerful enough to run Play.
|-
| Sony - PlayStation Portable || PPSSPP || Yes || B || Stand-alone || Donation ||
|-
| Spectravideo - SVI || blueMSX || Yes || ? || Retroarch || Free ||
|-
| Various (PC Adventures) || ScummVM || Yes || ? || Stand-alone || Free || Shows no directories on launch. Fix is to search for a game and place a “/“ in the search box and select “Choose”. This will bring up the directory listing.
|}

===Dreamcast Configuration Tips===

This only applies to beta batch units (Pink, Blue, Orange). Later units do not include Reicast, and include Flycast pre-installed by itself.

Configuration for the pre-installed Flycast Stand Alone app is done through the pre-installed Reicast app. Flycast will have better performance than Reicast.

Open Reicast and click on the DC bios and format memory card 1. For controller settings, set the ports of all to none, and the port for Android Playstation to A. Click Map, and map the buttons to their appropriate locations - you may not need to map all buttons. Click Done, then Done again. You may now close Reicast.

Launch Flycast, which shares a config with Reicast, and load and play your game.

If there are issues with the controller, you may need to modify the .cfg file in Flycast. To do this, go into the directory path for Flycast and find the folder named mappings. Inside, there should be a file named Android_Playstation3.cfg. Open the file, scroll to the bottom, and erase the line for deadzone value. This should not be needed if Reicast 20.02b or newer is installed, or if you have used the .cfg file.

*Return to [[Main Page]]

--------
Credits to beldandy561, Captain_Shoe, TortugaSs, Ryan86Me, StubbornPixel, CommieColin, Pocchitte

Getting Started

2020-12-18T00:33:45Z

173.61.114.27: /* Before You Begin */

== Before You Begin ==

'''WARNING!'''

Do '''NOT''' format the included microSD card. This will result in the loss of the RetroidOS closed system and all pre-installed games. If this happens, a copy of the contents (without games) can be found [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view here].

Do '''NOT''' update or delete any of the preinstalled apps or Retroarch cores. Many of these are older or modified versions which have been optimized to work on the RP2. If you are coming from a console gaming background, you may be used to all updates being both required and more-or-less improvements. This does not apply to the RP2: the various installed Android apps are not written specifically for the RP2, but for all Android devices. Due to the age of the RP2's hardware, updates may actually reduce functionality, or cause an app to stop working entirely, due to removal of support for legacy hardware/firmware.

Be careful about restoring/formatting Android. If you do this, you will lose pre-installed emulators and possibly some configuration settings. If this happens, you can find a backup image of Android [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA/folder/sM90hR4T here], and instructions on the process [https://cdn.discordapp.com/attachments/753684190603509871/779906286909259806/Reflashing_Guide.doc here]. If you need to restore Android to the original state, you will need to flash it. This can brick your device if done incorrectly, please only attempt at your own risk, and ask for assistance in our Discord channel if needed.

== Applying The Screen Protector ==

Follow [https://youtu.be/veB4dTZcDn4 this] helpful video guide for how to apply the screen protector.

== Booting Up For The First Time ==

When you first power your RP2 on after removing it from the box, it will boot into Android 6.0.

=== Setting Up RetroidOS ===

'''If you want to use your RP2 as a streamlined, plug-and-play, handheld retro game emulator, please [[An_Absolute_Beginner's_Guide_for_the_RP2|click on this link]] for a step-by-step guide.''' On the other hand, if you don't mind getting your hands dirty with Android and fiddling with emulator files and settings, read on.

Once your RP2 is powered on and showing the Android home screen, you should be able to connect your device to your Wi-Fi network through your system settings. WEP does not work on the RP2, so use WPA2 encryption.

If your preference is to use the RetroidOS closed system, navigate to the Toolbox application and select "Install Retroid Pocket App". (If you have an RP1, you'll want to download the Retroid App APK file within the built in browser from https://bit.ly/3bZhcQN and install it with Miix. It shows up under the APK Files menu in Miix). Once installed, open the Retroid app and say OK when it asks to reboot to the Retroid Pocket System. To setup WiFi in the RetroidOS system, hold the Home button for two seconds, and select Handheld settings. Open WiFi and click on Connect WiFi Network, and select the network you wish to join. To return to the Android OS, hold down the Home button for two seconds and click on Switch system. Press OK when asked to reboot to Open Source Android System.

A great alternative guide can be found at 
* [http://wagnerstechtalk.com/retroidp2/ Wagner's RP2 Tips] - Beginner tips and tricks by Wagner's Tech Talk

==== Adding your own ROMs to RetroidOS ====

If these instructions don't exactly match the way you've set up your own RP2, you'll already know enough to change those steps on your own, so I'll assume that you're doing this with a unit fresh from the factory.

# Safely eject your micro SD card from the RP2. If you aren't sure how to do that, just turn the unit off completely (not just standby), then remove the card. The micro SD card slot is on the bottom of the unit, under a rubber flap. After you lift the flap (it's NOT a plug that comes out completely), push the card INTO the slot slightly with your thumbnail. It is held in place by a mechanism kind of like a clicky ballpoint pen. Pushing it in slightly until it makes a soft click will cause a spring to push it out so you can grab it easily. Do not use tweezers or any metal tools, as you will probably damage the slot.
# Connect the micro SD card to a computer with a suitable card reader. If your computer tells you that the card must be formatted before use, DO NOT FORMAT THE CARD. There is (probably) nothing wrong with it, and it contains hard-to-replace files that are required by Retroid. If you see such a message, try using a different card reader, or a different computer.
# On the computer, copy any ROM files you want to transfer into the "/games/download/" folder on the micro SD card. This might also be a good time to make a backup of the files that came on the micro SD card with the RP2, in case something happens to the card later. Once the copy is complete, safely eject the micro SD card from the computer.
# Reinsert the micro SD card into your RP2. Push it into the slot until you hear a soft click; this will be a little further in than flush with the edge of the slot. Don't forget that the micro SD card should be inserted with the face (printed side) down (away from the screen side), and the back (plain black side) up (toward the screen side). If you switched the RP2 off, turn it on again. If it is in Android mode, switch to Retroid mode.
# In the Retroid system, hold the "HOME" button until the system menu appears.
# Move the highlight to "Enter game settings" with the d-pad or left thumbstick, and then press "A" to select it.
# Move the highlight to "External games management" with the d-pad or left thumbstick, and then press "A" to select it.
# Using the controls shown on the right side of the screen, select a game to add to the Retroid's game menu.
# A window will pop up, asking you to choose an emulator for this game. Move the highlight to the appropriate emulator name with the d-pad, and then press "A" to select it. Only the short emulator core names are shown, so if you can't figure out which emulator is the correct/best, you may need to do some research. [[Emulators#Emulation_within_RetroidOS|This list]] may help.

Your game should now be available from the Retroid game menu. If you have finished adding games, press "Y" until you get back to the main game menu. Enjoy!

NOTE: Some people have commented that game files must not be zipped. These instructions have only been tested with a regular (uncompressed) Super Famicom game. There may be additional issues with using zipped files or multi-file games (e.g. bin/cue disc images). Also, this process will not work without the RetroidOS files present on a normally-formatted (i.e. not Android "internal storage") microSD card, even though RetroidOS will appear to be working normally otherwise.

== SD Card Options ==

The RP2 comes with a 32 GB microSD card. Do NOT format or erase this card before backing up the files it comes with, as these are the files required for RetroidOS to work. If your card is erased, damaged, or accidentally formatted, you can find the necessary files (but without any games) [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view here]. If you want more than 32GB of storage in your RP2, you will need to replace the 32GB card with another card. If you want to use RetroidOS with a new card, you will also need to copy the critical files over to the new card, in exactly the same directory structure. For advice on which microSD card to buy, see [[Accessories]].

Whichever micro SD card you use in your RP2, it can be set up either as internal storage or external storage. Depending on your needs, you may wish to have both an external and internal card, or just one or the other. To swap between cards, make sure to turn off your device before removing one card and inserting the other. If you have an internal card and an external card, you will need to boot up the RP2 in one mode or the other with the incorrect card inserted. In this case it is probably best to swap cards while switched off in RetroidOS mode, as this likely offers less chance for damage to critical files.

=== Linking your internal apps to External SD card ===

There is another option to use your external card as storage for your apps. Advantages to using external card as internal storage is, you can still use your external sd card at card readers; you can move your apps back to internal storage if you want to replace the card; if you don't link system apps from internal storage to external card; you will be safe even if the external card gets corrupted. Also you can continue using RetroidOS with this option if you choose to. Lastly, you won't have any trouble with OTA updates.

To be able to do this first you need ROOT. Refer to the rooting section under Firmwares on this wiki. Afterwards, you will need a program as Apps2SD. Download it from Google Playstore. Open it, you will need to use "Partition Tool" from the first main menu. WARNING: This will delete your whole card and you should do a backup before doing that. You will have 3 options at Partition Tool, first one is for Rom storage; make it as FAT32 format, second one is for moving the apps; make it an "ext4" and the third one is for "swap" that is supposed to add more RAM for the system to use. Resize the partitions to your liking and hit "yes".

Device will reboot at that point. Open Apps2SD, click "Link Apps to SD card"; it will ask you to create mount script. Choose ext4 and from below, tick the box to the left of "Advanced". It will say "Success!" on this point and apps will show up. Just choose the app you want to carry to external sd card and click Link from bottom right and it is done.

=== Using Your SD Card as External Storage ===

If you would prefer to use your micro SD card in card readers and other devices, and don't want to install many Android apps to your RP2, you will probably want to keep the card as external storage. Additionally, if you want to use RetroidOS, you cannot use a card formatted as internal storage; while your RP2 will still appear to boot normally into RetroidOS, you will not be able to access or install any games.

To use RetroidOS with a new micro SD card, you will need to copy the files from your original 32GB card over to the new card. These files include encryption keys and support files that will allow RetroidOS to read stored games, to install new games from local files, and to access the Retroid "online store". Before you copy the files over, you should also format your new card as "exFAT" format. Using a card formatted as "FAT32" (the most common way that they come in the package) doesn't seem to cause any problems for RetroidOS, but RetroidOS may damage parts of the FAT32 filesystem, causing errors if you also try to use it in Android or an external card reader connected to a computer.

Some guides recommend using partition management software (e.g. MiniTool, Disk Genius) to make a complete backup of the partition on the included 32GB micro SD card, and then write this backup to your new micro SD card. If you are comfortable working with partitions and drive images, this can work very well. However, it doesn't appear to offer any advantages over simply formatting your new micro SD card to "exFAT" and then copying all the files over normally. Furthermore, if you make a mistake during the partition copying process, it is possible to introduce errors into your micro SD cards which would require more work to repair.

== Controller Settings ==

The controller is already setup in RetroidOS, and should also already be set up in all emulators in Android. If you are prompted to choose a controller, the RP2's own controls will be listed as "Playstation 3".

=== Joystick Mode Toggle ===

The "Toolbox" app in Android has a setting labelled "Joystick Mode Toggle". This will change how the RP2's left analog stick appears to all apps within Android. The options are:
*Analog Square mode - Apps will see the left joystick as an analog stick, but it will only register movement in eight directions (up, down, left, right, and diagonals).
*Analog Circle mode - Apps will see the left joystick as an analog stick, and it will register the full range of movement in all directions.
*Retroarch mode - Apps will not see the left joystick at all. Any movement of the left joystick will be copied to the d-pad.

== Further Configuration ==

=== Google Accounts on Android on the RP2 ===

The RP2 offers Android 6.0; with this you can link a Google account to the device for use with Google services like the Play Store. If you don't want to link your personal account, you are also free to use your RP2 without any linked accounts, or you can create a new, "dummy" account for the device. You could also use FLOSS/free/libre alternatives to get new apps and install them manually (a.k.a. "sideloading").

To do that you can use the [https://f-droid.org F-Droid] app catalogue for managing the FLOSS apps, like Moonlight or Retroarch (adding the [http://fdroid.libretro.com Retroarch repo] first; which normally is a version newer than the one available from the Play Store). You can also use [https://auroraoss.com/app_info.php?app_id=1 Aurora store](also in f-droid) a direct alternative to Play Store, to manage all the apps (like Steam Link).

Finally if you have any privacy concerns you can safely disable (in the Toolbox app) the google apps like:

* Google Play Store
* Google Play services (also '''GSF''' Google Services Framework)
* Google Contact Sync
* Browser (replace with Firefox/Fennec is recommended)
* Sound Recorder, Music, Video, Pictures

The default apps in the RP2 do not interact with the GSF.

=== Emulators ===

See [[Emulators]].

=== Frontends & Launchers ===

See [[Frontends & Launchers]].

=== Retroarch ===

See [[A Brief Guide to Retroarch]].

== Helpful Video Content Collection ==

The following video collection has been created to collate all of the current Retroid Pocket 2 YouTube content, Covering Guides, Information, Performance Tip and Tricks & Reviews.
All videos have been posted in the Retroid Handhelds Discord server, which can be found here [https://discord.gg/6xpfH5 Here] and the Youtube / Media channel [https://discord.gg/6xpfH5 Here]

These videos have been created by Retroid Enthusiasts in order to share information and to help the Retroid Community - Check them out on Youtube and Subscribe to the channels to see many more informative and helpful video content.

'''Retroid Community'''

* The Retroid Community Pocket 2 Community: '''[https://www.youtube.com/watch?v=tleiYciCpFk&feature=youtu.be Video]''' Content Creator: Spec

''' Getting Started'''

* Putting on the glass screen protector: '''[https://www.youtube.com/watch?v=veB4dTZcDn4 Video]''' Content Creator: RetroGM

* How to put roms on to your Retorid Pocket 2: '''[https://www.youtube.com/watch?v=DrTC5aXLvMY&feature=youtu.be Video]''' Content Creator: More Tech Sir!

* Install Dual Boot Mode on Retroid Pocket 2: '''[https://www.youtube.com/watch?v=om6mTsO5dfs&ab_channel=WickedGamer%26Collector Video]''' Content Creator: Wicked Gamer & Collector

* Retroarch Theme, Config and Setup: '''[https://www.youtube.com/watch?v=6Z5haq88vnk Video]''' Content Creator: Emulation Dojo

* Themes Preview - Frankatchoo by Muttonheads: '''[https://www.youtube.com/watch?v=p-j4mfzmZpA Video]''' Content Creator: Emulation Dojo

* Themes Preview - XMBC by chalotron: '''[https://www.youtube.com/watch?v=tspBA4cJ9dA Video]''' Content Creator: Emulation Dojo

'''Emulation'''

Set Ups, Optimisations, Performance Tests and Game Showcases!

* Optimisation and Setting Guide: '''[https://www.youtube.com/watch?v=C1VkHUl3LEM&feature=youtu.be Video]''' Content Creator: Emulation Dojo

* Third Party Apps - Android / PC Ports: '''[https://www.youtube.com/watch?v=HBKOi7NZmRQ&feature=youtu.be Video]''' Content Creator: More Tech Sir!

* FPse Configuration Guide on Retroid Pocket 2: '''[https://www.youtube.com/watch?v=NofUypHnmRA&feature=youtu.be Video]''' Content Creator: Spin Reto

* PSP Emulation Test - PPSSPP: '''[https://www.youtube.com/watch?v=tRK9N-ZjWHQ&feature=youtu.be Video]''' Content Creator: Spin Retro

* PPSSPP Optimisation & Performance Test: '''[https://www.youtube.com/watch?v=fOcUpjlIXhM&feature=youtu.be Video]''' Content Creator: Emulation Dojo

* Frontend DIG Setup and Customisation: '''[https://www.youtube.com/watch?v=Wva_2RQtDzU Video]''' Content Creator: Emulation Dojo

* Sega Dreamcast Guide: '''[https://www.youtube.com/watch?v=0vuDwG39eG0&feature=youtu.be Video]''' Content Creator: Retro Game Corp

* Sega Dreamcast Gameplay Test - 41 GAMES!: '''[https://www.youtube.com/watch?v=6LVLaW-_CNU Video]''' Content Creator: Retro Game Corp

* How to Configure GBC.emu, GBA.emu, MD.emu, and SNES 9x EX+: '''[https://www.youtube.com/watch?v=bUjmWc7MGVU&feature=youtu.be Video]''' Content Creator: Spin Retro

* DOS Game Emulation Test: '''[https://www.youtube.com/watch?v=-A3I25kTGRM&feature=youtu.be Video]''' Content Creator: Spin Retro

* Top 10 Megadrive Games: '''[https://www.youtube.com/watch?v=pI3tBE4EQVk Video]''' Content Creator: Spin Retro

* Android Game Showcase #1: '''[https://www.youtube.com/watch?v=l9OgK6RMQQk&t=37s Video]''' Content Creator: Spec

* Android Game Showcase #2: '''[https://www.youtube.com/watch?v=V2ai-35Xkas Video]''' Content Creator: Spec

* Mupen64Plus - N64 - Mario Party 3: '''[https://www.youtube.com/watch?v=mVFFejvWD0o&feature=youtu.be Video]''' Content Creator: Spin Retro

* Arcade Games Tested on RETROID OS (FBA & MAME): '''[https://www.youtube.com/watch?v=AnrNbIo2llA&feature=youtu.be Video]''' Content Creator: Spin Retro

'''Product reviews, Comparisons and Inspirations'''

* Product Test: Skull & Co. grips: '''[https://www.youtube.com/watch?v=-eNHcpeNojE&feature=youtu.be Video]''' Content Creator: Retro Game Corp

* Super Famicom Controller vs RP2: '''[https://www.youtube.com/watch?v=9Qo2N9hX9Wo Video]''' Content Creator: RetroGM

''Helpful Video Content Collection shall be updated with Future content sometime in the future''

----
Thank you to straxusii, TortugasSs, silverduskmusic, r0b0-tr0n, Jecklen, dsachs420, TotallyTerry, R E T R O, Lugubrious, DFOXpro, and Pocchitte for their contributions to this guide.

Firmware

2020-11-22T03:10:54Z

173.61.114.27: /* Re-flashing Your RP2 with Android 6.0 */

__TOC__

=Retroid Official Over-the-Air (OTA) Method=

=== Update Repair App ===

In order to use the Retroid Upgrade app, you are required to have a working version of RetroidOS on an externally formatted SD card.
If you need to repair RetroidOS or reinstall it (if you're moving from internally formatted, or just deleted it) follow the procedure linked below.

While this will restore RetroidOS functionality for those that don't have it, the steps are still useful even for users who have RetroidOS intact as it will install the necessary Update.APK which is Retroid's OTA app.

[https://cdn.discordapp.com/attachments/753684190603509871/774740929763606549/Upgrade_Repair_apk_Installation_method.docx Click here for the procedure.] 
 
Please note Retroid does NOT update via Google's OTA facility.
 
 
Once the above is finished, you can run the Updater tool to immediately update to the newest version of Android currently available for the device.

Link to the Upgrade Repair APK file is available at https://bit.ly/2GEqyGz
 

=Manual Flashing Method=

== Android 8.1 ==

Below are the 8.1 Image Files. Follow this [https://youtu.be/6aXKeEpOu9Y video guide] for updating or follow the included instructions in the zip file.

 
8.1 OS Image (V3 Final):
https://drive.google.com/file/d/1-BGTmqqTOXrr5kxBKslpScLhmxbfPnvm/view?usp=drivesdk

 
8.1 SD Card image (V3 Final): https://drive.google.com/file/d/1NcGMacWnCxmpDq0vLbct6s_JvhzJl6sP/view?usp=sharing

 
Mega Mirror copy of the GDrive folder with instructions on flashing 6.0 and 8.1: https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA (Use if Gdrive links aren't working for you).

== RetroidOS ==

=== Downloading the RetroidOS Files ===

Here is a [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view stock SD Card image (2.6GB ZIP)] for use with the RP2, in case your original card is damaged, formatted, or erased. This will restore your ability to use RetroidOS and the Retroid store, but no games are included.
 
 
 

== Advanced Actions ==

=== Downloading the Android Files ===

If you uninstalled any preinstalled apps and would like to reinstall the stock versions, here is [https://drive.google.com/drive/folders/14osfAwZURQEayHUyrSA5j7TdEV1dmxyP?usp=sharing a folder with all the APKs.]

A backup of the stock internal storage files (6.5MB) can be found [https://drive.google.com/file/d/1Viw4qTmEGxllbTkbz6NR5uUbA4Ge1yTk/view?usp=sharing here.] This is useful if you mess up the configs that come with the device.

[https://drive.google.com/drive/folders/1MAwGsJ-uz6jkxVPCvuMY9QUhMzJu2Cp0?usp=sharing Here] is a Google Drive folder with all the files contained on this wiki page. You can add it to your Google Drive and find it in the "Shared with me" section for easy future access.

=== Root Access (Android 6 Only) ===

[https://cdn.discordapp.com/attachments/753684190603509871/755114189999177808/rp2-root.zip Download this ZIP archive] and root your RP2 at your own risk. There is a guide available inside the zip called 'Installation.txt'.

You will also need ADB Drivers for windows. You can easily achieve this by using this program:

[https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view Download ADB Drivers]

=== Re-flashing Your RP2 with Android 6.0 ===

Here is our mega [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA download] for Android 6, re-flash guide and files within. This will NOT restore your RetroidOS files (see above).

Tip: If you are having any issues with connecting your device to your PC or if you are trying to re-flash the device, make sure to install the [https://developer.android.com/studio#downloads Android SDK suite]. It will include the drivers for USB support. If you have previous drivers please make sure to uninstall them. If you do not want the entire suite, you can install just the USB drivers. Make sure to read the instructions, and [https://developer.android.com/studio/run/win-usb download here].

Notes before we get started: Here is the [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA source folder] with all the files you'll need to re-flash your Retroid.

Tip: If for whatever reason you have changed default usb drivers on your PC, you will reach a point in this process where you hit download and connect your device, but nothing happens. The fix is to download [https://developer.android.com/studio Android Studio] and install it, then run it once. As soon as you see a pop up, close it, and try the re-flash process once more. It should work this time. We recommend this option because it is less complex than installing drivers and running the risk of not having the correct drivers for your RP2. After you flash, you can safely delete android studio, as you will no longer need it.

Lets get started:

# Download this [https://mega.nz/folder/hQlBUCyQ#3O36oLCAZPbAGzSS6WKcEw/folder/ZRligRwS zip file] containing everything you will need. When you first come to the mega.nz page you should see a button on the top right that says “Download as Zip”. If your initial emulators were somehow corrupted, you made changes that you can’t revert or deleted software you can’t get back, re-flashing may be necessary. Before anything else you’ll want to backup all saves and save states from emulators you have used.
# After the download completes, extract the zip.
# Open the newly extracted folder and navigate to the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory and open flash_tool.exe. Note: If you have any anti-virus software, now would be a good time to disable it for a bit.
# When the flash tool first opens, it looks pretty daunting but don’t worry, it’s pretty easy to setup. At this point it’s important to make sure that your Retroid Pocket 2 is OFF and NOT CONNECTED to your computer.
# You should see “Download Agent” as the top editable box with the word “choose on the right side. Click “choose” and navigate to the MTK_AllInOne_DA.bin file located in the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory.
# Below that you’ll see an editable field called “Scatter-loading File”, once again, click “Choose” to the right of this. For this file, navigate back to the root of the folder you extracted, go to the Images directory and select MT6580_Format_All_scatter.txt.
# At this point, many green and white rows should have appeared with their boxes checked on the left side. Uncheck every box EXCEPT FOR userdata and system. (ignore the directory paths in the photo for the checked rows).
# If everything looks right, click download on the top left. This will put your computer in stand-by mode, waiting for a device to be connected. Once again, make sure your Retroid Pocket 2 is off and your saves are backed up! Now plug it into your computer and you should see a progress bar at the bottom start moving. If you don't see this bar happen don't panic. You're RPV2 will show a battery drained symbol then the amount of battery you actually have, you'll hear an audible click then wait a few seconds (5 max) unplug and power on the device. You can choose to find and download Android USB Drivers either individually by OEM or if you can find a pack. The safest bet is to [https://developer.android.com/studio download] Android Studio directly. This is a big download so be patient. once it's downloaded install it, run it once and as soon as something pops up you can go ahead and close it, the drivers will already be installed (it will prompt you to install more things after you finish the first install wizard, no need to do that just close the program).
# Once this is finished the screen will display an image letting you know.
# At this point, it’s safe to unplug your Retroid Pocket 2 and power it on. The first boot will take a while and when it boots into the OS, you’ll have to wait for it to install all of the emulator APKs. Also, the main screens resolution may be distorted, wait a minute and it will auto correct. Once everything has finished installing, restart the system once and you’ll be good to go. Enjoy!

Remember to uninstall Android studio from your computer if you no longer have a need for it.

=== Android 8.1 Status ===

This wiki will shortly receive an overhaul to be 8.1 focused. For more information about what to expect from the update, see [[Android_8.1_on_the_RP2#What_to_Expect|here]].

----------------------------------------------
Credit to Jecklen, Taki, Kaoshade92, Dsachs420, uncletrunks, /silverdusk/ and TotallyTerry.

Firmware

2020-11-07T23:28:05Z

173.61.114.27: /* Re-flashing Your RP2 with Android 6.0 */

__TOC__

=Retroid Official Over-the-Air (OTA) Method=

=== Update Repair App ===

In order to use the Retroid Upgrade app, you are required to have a working version of RetroidOS on an externally formatted SD card.
If you need to repair RetroidOS or reinstall it (if you're moving from internally formatted, or just deleted it) follow the procedure linked below.

While this will restore RetroidOS functionality for those that don't have it, the steps are still useful even for users who have RetroidOS intact as it will install the necessary Update.APK which is Retroid's OTA app.

[https://cdn.discordapp.com/attachments/753684190603509871/774740929763606549/Upgrade_Repair_apk_Installation_method.docx Click here for the procedure.] 
 
Please note Retroid does NOT update via Google's OTA facility.
 
 
Once the above is finished, you can run the Updater tool to immediately update to the newest version of Android currently available for the device.

Link to the Upgrade Repair APK file is available at https://bit.ly/2GEqyGz
 

=Manual Flashing Method=

== Android 8.1 ==

Below are the 8.1 Image Files. Follow this [https://youtu.be/6aXKeEpOu9Y video guide] for updating or follow the included instructions in the zip file.

 
8.1 OS Image (V3 Final): https://drive.google.com/file/d/1iH-E4yjEbHGsC_fal09kyIkMI1ULdN81/view?usp=sharing

 
8.2 SD Card image (V3 Final): https://drive.google.com/file/d/1NcGMacWnCxmpDq0vLbct6s_JvhzJl6sP/view?usp=sharing

== RetroidOS ==

=== Downloading the RetroidOS Files ===

Here is a [https://drive.google.com/file/d/1Li1LR9Lc9-cMIFtM7UXWPB8oDDTPqtAi/view stock SD Card image (2.6GB ZIP)] for use with the RP2, in case your original card is damaged, formatted, or erased. This will restore your ability to use RetroidOS and the Retroid store, but no games are included.
 
 
 

== Advanced Actions ==

=== Downloading the Android Files ===

If you uninstalled any preinstalled apps and would like to reinstall the stock versions, here is [https://drive.google.com/drive/folders/14osfAwZURQEayHUyrSA5j7TdEV1dmxyP?usp=sharing a folder with all the APKs.]

A backup of the stock internal storage files (6.5MB) can be found [https://drive.google.com/file/d/1Viw4qTmEGxllbTkbz6NR5uUbA4Ge1yTk/view?usp=sharing here.] This is useful if you mess up the configs that come with the device.

[https://drive.google.com/drive/folders/1MAwGsJ-uz6jkxVPCvuMY9QUhMzJu2Cp0?usp=sharing Here] is a Google Drive folder with all the files contained on this wiki page. You can add it to your Google Drive and find it in the "Shared with me" section for easy future access.

=== Root Access (Android 6 Only) ===

[https://cdn.discordapp.com/attachments/753684190603509871/755114189999177808/rp2-root.zip Download this ZIP archive] and root your RP2 at your own risk. There is a guide available inside the zip called 'Installation.txt'.

You will also need ADB Drivers for windows. You can easily achieve this by using this program:

[https://drive.google.com/file/d/0B0MKgCbUM0itSUhpUklCTFpzWkE/view Download ADB Drivers]

=== Re-flashing Your RP2 with Android 6.0 ===

Here is [https://cdn.discordapp.com/attachments/753684190603509871/753684754468962435/Retroid2ReflashGuide.pdf a re-flash guide (498KB PDF)] for Android 6. It includes a link to download the necessary files. This will NOT restore your RetroidOS files (see above).

Tip: If you are having any issues with connecting your device to your PC or if you are trying to re-flash the device, make sure to install the [https://developer.android.com/studio#downloads Android SDK suite]. It will include the drivers for USB support. If you have previous drivers please make sure to uninstall them. If you do not want the entire suite, you can install just the USB drivers. Make sure to read the instructions, and [https://developer.android.com/studio/run/win-usb download here].

Notes before we get started: Here is the [https://mega.nz/folder/4E8wlJTQ#OvhG5qD-I0Ui7-1DCJG-SA source folder] with all the files you'll need to re-flash your Retroid.

Tip: If for whatever reason you have changed default usb drivers on your PC, you will reach a point in this process where you hit download and connect your device, but nothing happens. The fix is to download [https://developer.android.com/studio Android Studio] and install it, then run it once. As soon as you see a pop up, close it, and try the re-flash process once more. It should work this time. We recommend this option because it is less complex than installing drivers and running the risk of not having the correct drivers for your RP2. After you flash, you can safely delete android studio, as you will no longer need it.

Lets get started:

# Download this [https://mega.nz/folder/FQsRGbYD#rMLsoUxaZEIFnt0l6EseJA zip file] containing everything you will need. When you first come to the mega.nz page you should see a button on the top right that says “Download as Zip”. If your initial emulators were somehow corrupted, you made changes that you can’t revert or deleted software you can’t get back, re-flashing may be necessary. Before anything else you’ll want to backup all saves and save states from emulators you have used.
# After the download completes, extract the zip.
# Open the newly extracted folder and navigate to the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory and open flash_tool.exe. Note: If you have any anti-virus software, now would be a good time to disable it for a bit.
# When the flash tool first opens, it looks pretty daunting but don’t worry, it’s pretty easy to setup. At this point it’s important to make sure that your Retroid Pocket 2 is OFF and NOT CONNECTED to your computer.
# You should see “Download Agent” as the top editable box with the word “choose on the right side. Click “choose” and navigate to the MTK_AllInOne_DA.bin file located in the SP_Flash_Tool_exe_Windows_v5.1832.00.000 directory.
# Below that you’ll see an editable field called “Scatter-loading File”, once again, click “Choose” to the right of this. For this file, navigate back to the root of the folder you extracted, go to the Images directory and select MT6580_Format_All_scatter.txt.
# At this point, many green and white rows should have appeared with their boxes checked on the left side. Uncheck every box EXCEPT FOR userdata and system. (ignore the directory paths in the photo for the checked rows).
# If everything looks right, click download on the top left. This will put your computer in stand-by mode, waiting for a device to be connected. Once again, make sure your Retroid Pocket 2 is off and your saves are backed up! Now plug it into your computer and you should see a progress bar at the bottom start moving. If you don't see this bar happen don't panic. You're RPV2 will show a battery drained symbol then the amount of battery you actually have, you'll hear an audible click then wait a few seconds (5 max) unplug and power on the device. You can choose to find and download Android USB Drivers either individually by OEM or if you can find a pack. The safest bet is to [https://developer.android.com/studio download] Android Studio directly. This is a big download so be patient. once it's downloaded install it, run it once and as soon as something pops up you can go ahead and close it, the drivers will already be installed (it will prompt you to install more things after you finish the first install wizard, no need to do that just close the program).
# Once this is finished the screen will display an image letting you know.
# At this point, it’s safe to unplug your Retroid Pocket 2 and power it on. The first boot will take a while and when it boots into the OS, you’ll have to wait for it to install all of the emulator APKs. Also, the main screens resolution may be distorted, wait a minute and it will auto correct. Once everything has finished installing, restart the system once and you’ll be good to go. Enjoy!

Remember to uninstall Android studio from your computer if you no longer have a need for it.

=== Android 8.1 Status ===

Final version has dropped via OTA. This wiki will shortly receive an overhaul to be 8.1 focused. For more information about what to expect from the update, see [[Android_8.1_on_the_RP2#What_to_Expect|here]].

----------------------------------------------
Credit to Jecklen, Taki, Kaoshade92, Dsachs420, uncletrunks, /silverdusk/ and TotallyTerry.