Editing Troubleshooting & Known Bugs (section)

=== Screen ===

==== Why does my RP2 have lightbleed? ====

Some people will notice a little bit of light bleed in the lower left or lower right of their screen. The amount of left side bleed can be influenced by the different RP2 plastic colors.

Lightbleed may also be fixed by pushing down lightly on the screen in all 4 corners, to confirm its seated firmly. To further fix this, open your RP2 and look for the lower left motherboard screw when open from the rear of the unit, this screw is most likely a bit too tight from the factory. Loosening this screw one half turn will relieve pressure and reduce light-bleed issues.