An Absolute Beginner's Guide for the RP2
Please DO NOT LINK TO THIS PAGE from anywhere on the wiki.
I absolutely DO NOT want it to be visible until it is finished. Once I'm ready, I'll link to it from the main page, probably with a small graphic. (Pocchitte, 02-Oct-2020)
DO NOT LINK Welcome to the Retroid Pocket 2!
This guide has been written for people who just want to play games on their RP2 as soon as possible, without any messing around in Android. I'll show you how to install RetroidOS on your new RP2, and explain some of the basics of using it. RetroidOS is the alternative operating system that will turn your RP2 into a simple retro handheld that works without having to tweak any settings.
DO NOT LINK Before you start
To follow this guide, you will need:
- A Retroid Pocket 2
- The 32GB micro SD card which came with your Retroid Pocket 2
- A Wi-Fi router with a connection to the Internet
DO NOT ERASE OR FORMAT YOUR INCLUDED MICRO SD CARD! A number of people have either formatted their micro SD cards or deleted all the files that came preinstalled on it. Without the files that come on your included 32GB micro SD card, you will not be able to run RetroidOS. If you have already deleted the files or formatted the card, you can download this ZIP file to your computer, and copy the files inside to your blank micro SD card. This will restore the files needed to run RetroidOS, but without any of the games that originally came preinstalled.
Make sure that your RP2's battery is fully charged (100%) before continuing to follow this guide.
DO NOT LINK How to install RetroidOS
DO NOT LINK Turning on your RP2 for the first time
The power button is a small, round button, located on the top edge of the RP2 between the right shoulder buttons and the volume rocker. First, make sure that your 32GB micro SD card is inserted correctly into the port at the bottom of the RP2; the golden connector pins should be facing up, toward the screen side. Then press and hold the power button until the screen lights up (about three seconds), and your RP2 begins to boot up.
IMAGE OF POWER BUTTON
DO NOT LINK Initial boot-up, and connecting to Wi-Fi
Your RP2 will take 40 to 50 seconds to boot up. This is normal.
The first time that you boot up your RP2 out of the box, it will boot into Android 6.0. If you have never used an Android device before, this can be a little daunting, but don't worry, as we won't be spending much time with it.
IMAGE OF RP2 WITH CONTROLS POINTED OUT
If you press a direction on the d-pad, you will see a square highlight that moves between the various icons on the screen. When in Android mode, the controller's "A" button is used to select items, while "B" is the "back" or "cancel" button. Use the d-pad to select the gear icon labelled "Settings", then press the "A" button to confirm. This will open the Android settings menu.
IMAGE OF SETTINGS ICON
Use the d-pad to select "Wi-Fi" (the highlight will probably start there), then press the "A" button to confirm. Once the Wi-Fi screen has opened, press the "A" button again to turn on your RP2's Wi-Fi. It may take a few seconds before the RP2 starts to scan for Wi-Fi hotspots, so please be patient and don't press the button more than once as this may turn off Wi-Fi.
Once you see the name of your Wi-Fi router on the list, use the d-pad to move the highlight to it, and press the "A" button to select it. This will open a pop-up window where you will be able to enter the Wi-Fi password for your router. The virtual on-screen keyboard should open automatically. Use the d-pad to move the blue highlight around the keyboard, and press the "A" button to enter the currently selected character. To switch from letters to numbers and punctuation, select the "123_!" button on the far left of the middle row of the keyboard. To switch back to letters, select the same button, which will now be labelled "Back". When you have entered all of the characters in your Wi-Fi password, move the blue highlight to the keyboard icon button at the top right of the virtual keyboard, and press the "A" button to close it. After that, use the d-pad to select "Connect" at the bottom right of the pop-up window, then press the "A" button to confirm. After a few moments, your RP2 should connect to your Wi-Fi router.
IMAGE OF VIRTUAL KEYBOARD WITH IMPORTANT BUTTONS POINTED OUT
Once your RP2 is connected to the Internet, press the RP2's "HOME" button (located to the lower-left of the screen) to return to the Android home screen.
IMAGE OF RP2 WITH HOME BUTTON POINTED OUT
DO NOT LINK Downloading and switching to RetroidOS
From the main Android home screen, use the d-pad to select the middle icon at the bottom of the screen, which looks like a circle with six dots inside. Then press the "A" button to confirm. This will open the Android "app drawer", which is a menu of all the apps installed in Android on your RP2.
IMAGE OF APP DRAWER ICON IMAGE OF APP DRAWER
Don't worry if your app drawer doesn't look exactly like the one in the image above; this screenshot was taken on an RP2 which has already had several extra Android apps installed by the user.
Now that you're in the app drawer, use the d-pad to move the square highlight until it is on the "Toolbox" app. Because there will be more apps installed on your RP2 than can fit on the screen at once, you will probably need to scroll the app drawer a little before you will be able to see the "Toolbox" app. Just keep moving the highlight down, even after you reach the bottom of the screen. The app drawer will scroll automatically to keep up. Once the icon is highlighted, press "A" to open the "Toolbox" app.
Inside the "Toolbox" app, use the d-pad to select the "Install Retroid Pocket app" option, and press the "A" button to confirm. As long as your Wi-Fi connection is working, your RP2 should connect to the Retroid servers, and then download and install the "Retroid" app for Android. When it has finished, it will display the message, "???". Now exit the "Toolbox" app by pressing the "HOME" button to return to the Android home screen.
The "Retroid" app acts kind of like a key to the encrypted files that came on your 32GB micro SD card.
Congratulations! Your RP2 will now boot directly into RetroidOS, and you should never need to touch Android again unless you want to.
DO NOT LINK Using RetroidOS
DO NOT LINK Adding your own games to RetroidOS
See this guide for how to add your own games to RetroidOS.
