Editing Getting Started (section)

== Booting Up For The First Time ==

When you first power your RP2 on after removing it from the box, it will boot into Android 6.0.

=== Setting Up RetroidOS ===

'''If you want to use your RP2 as a streamlined, plug-and-play, handheld retro game emulator, please [[An_Absolute_Beginner's_Guide_for_the_RP2|click on this link]] for a step-by-step guide.''' On the other hand, if you don't mind getting your hands dirty with Android and fiddling with emulator files and settings, read on.

Once your RP2 is powered on and showing the Android home screen, you should be able to connect your device to your Wi-Fi network through your system settings. WEP does not work on the RP2, so use WPA2 encryption. 

If your preference is to use the RetroidOS closed system, navigate to the Toolbox application and select "Install Retroid Pocket App". (If you have an RP1, you'll want to download the Retroid App APK file within the built in browser from https://bit.ly/3bZhcQN and install it with Miix. It shows up under the APK Files menu in Miix). Once installed, open the Retroid app and say OK when it asks to reboot to the Retroid Pocket System. To setup WiFi in the RetroidOS system, hold the Home button for two seconds, and select Handheld settings. Open WiFi and click on Connect WiFi Network, and select the network you wish to join. To return to the Android OS, hold down the Home button for two seconds and click on Switch system. Press OK when asked to reboot to Open Source Android System.

A great alternative guide can be found at <br>
* [http://wagnerstechtalk.com/retroidp2/ Wagner's RP2 Tips] - Beginner tips and tricks by Wagner's Tech Talk

==== Adding your own ROMs to RetroidOS ====

If these instructions don't exactly match the way you've set up your own RP2, you'll already know enough to change those steps on your own, so I'll assume that you're doing this with a unit fresh from the factory.

# Safely eject your micro SD card from the RP2. If you aren't sure how to do that, just turn the unit off completely (not just standby), then remove the card. The micro SD card slot is on the bottom of the unit, under a rubber flap. After you lift the flap (it's NOT a plug that comes out completely), push the card INTO the slot slightly with your thumbnail. It is held in place by a mechanism kind of like a clicky ballpoint pen. Pushing it in slightly until it makes a soft click will cause a spring to push it out so you can grab it easily. Do not use tweezers or any metal tools, as you will probably damage the slot.
# Connect the micro SD card to a computer with a suitable card reader. If your computer tells you that the card must be formatted before use, DO NOT FORMAT THE CARD. There is (probably) nothing wrong with it, and it contains hard-to-replace files that are required by Retroid. If you see such a message, try using a different card reader, or a different computer.
# On the computer, copy any ROM files you want to transfer into the "/games/download/" folder on the micro SD card. This might also be a good time to make a backup of the files that came on the micro SD card with the RP2, in case something happens to the card later. Once the copy is complete, safely eject the micro SD card from the computer.
# Reinsert the micro SD card into your RP2. Push it into the slot until you hear a soft click; this will be a little further in than flush with the edge of the slot. Don't forget that the micro SD card should be inserted with the face (printed side) down (away from the screen side), and the back (plain black side) up (toward the screen side). If you switched the RP2 off, turn it on again. If it is in Android mode, switch to Retroid mode.
# In the Retroid system, hold the "HOME" button until the system menu appears.
# Move the highlight to "Enter game settings" with the d-pad or left thumbstick, and then press "A" to select it.
# Move the highlight to "External games management" with the d-pad or left thumbstick, and then press "A" to select it.
# Using the controls shown on the right side of the screen, select a game to add to the Retroid's game menu.
# A window will pop up, asking you to choose an emulator for this game. Move the highlight to the appropriate emulator name with the d-pad, and then press "A" to select it. Only the short emulator core names are shown, so if you can't figure out which emulator is the correct/best, you may need to do some research. [[Emulators#Emulation_within_RetroidOS|This list]] may help.

Your game should now be available from the Retroid game menu. If you have finished adding games, press "Y" until you get back to the main game menu. Enjoy!

NOTE: Some people have commented that game files must not be zipped. These instructions have only been tested with a regular (uncompressed) Super Famicom game. There may be additional issues with using zipped files or multi-file games (e.g. bin/cue disc images). Also, this process will not work without the RetroidOS files present on a normally-formatted (i.e. not Android "internal storage") microSD card, even though RetroidOS will appear to be working normally otherwise.